What You Can Do with This Machine
Safety Precautions to Be Followed
Positions of WARNING and CAUTION labels
(mainly Europe) Overseas Affiliates and Noise Emission Information
(mainly Europe) User Information on Electrical and Electronic Equipment
(mainly Europe) Note for the Battery and/or Accumulator Symbol (For EU countries only)
(mainly North America) Notes to users in the state of California (Notes to users in USA)
Duplication and Printing Prohibited
Recommended Paper Sizes and Types
Setting Up the Paper Delivery Tray
Adjusting the Paper Alignment Wings and Chocks
Sizes and Weights of Recommended Originals
Sizes That Can Be Detected Automatically
Placing Originals on the Exposure Glass
Adjusting the Print Image Position
Reducing or Enlarging Originals
Printing on Thick or Thin Paper
Adjusting the Print Image Density
Storing Frequently Used Functions
Storing Functions in a Program
When Printing on Custom Size Paper
Entering a User Code to Use the Machine
Setting a Tape Roll in the Tape Dispenser
If the Machine Does Not Work as Required
When the Open Cover/Unit Indicator Is Lit
When the Master End Indicator Is Lit
Master Tray Is Not Set Properly
When the Master Eject Indicator Is Lit
When the Set Key Counter Indicator Is Lit
When Prints Are Not Properly Ejected onto the Paper Delivery Tray
Dirt on the Back Side of the Paper
Dirt on the Front Side of Paper (Black Line/Stain)
Blank Prints or Incomplete Prints
Cleaning the Exposure Glass Cover
Paper Feed Roller (paper feed tray)