1 System

1

Auto Reset

The machine's settings will be reset to their default values if it is left idle for a set period of time.

Default: [Off]

2

Display R.Counter

Shows the total number of masters and prints.

The trial print is not counted as part of the total.

3

Reset R. Counter

You can specify whether to reset this counter.

Default: [Do not clear]

4

mm/inch

You can select the units of measurement used on the panel display.

(mainly Europe and Asia):

Default: [mm]

(mainly North America):

Default: [inch]

5

Language on LCD

You can select the language for the panel display.

Default: [English]

6

Data Print

You can print log data and counter lists.

7

Date/Time

You can use the number keys to set the date and time for the machine's internal clock.

8

E. Saver Option

You can select Energy Saver mode. The two modes available: Energy Saving and Auto Off.

Default: [Energy Saving]

9

E. Saver Timer

You can specify the time the machine waits to enter Energy Saver mode.

Default: [1 min.] (minutes)

10

Auto Off Timer

You can specify whether to use the Auto Off Timer.

Default: [Off]

11

Backlight Timer

You can specify the amount of time the display panel backlight remains lit.

Default: [1 min.] (minutes)