Top Page > Advanced Printing > Memory/Class

Memory/Class

The Memory/Class function is useful especially for people such as teachers, who often have to make different numbers of prints from the same original for different classes, or have to make the same number of prints from a number of different originals for the same class.

The following modes are available under the Memory/Class function:

Class Mode

Use this mode to make prints from one original for multiple classes, with the same number of prints for each class.

Illustration of Class Mode

Memory Mode

You can choose from the following two modes:

Normal Memory Mode
Use this mode to make prints from a number of different originals. A different number of prints is made from each original.

Illustration of Normal Memory Mode

Stack Memory Mode
Use this mode to make prints from one original, so that a different number of prints can be made for each class.

Illustration of Stack Memory Mode

You can specify either Normal Memory Mode or Stack Memory Mode as the default. See 4 Mode Setting .

Recall

Use this to recall settings that you have stored under Memory Mode and Class Mode.

Select Department Mode

Illustration of Select Class/Year Mode

All
Use this to make prints from the same original for all registered departments.
Department
Select to make prints from the same original for selected departments only.

If the want to limit the use of this machine to school or college, you can choose to have this mode displayed [Select Class/Year] as instead of [Select Department]. For details see 2 Set Operat'n Mode .