Skip header
 

Top Page > Advanced Printing > Color Printing > Making Color Prints

Making Color Prints

1Make sure the color drum indicator on the panel display is lit.

Color drum indicator illustration

2Set your original.

3Make sure the [Master Making] mode select key is lit.

If it is not lit, press the [Master Making] mode select key.

Master Making mode select key illustration

4Enter the number of prints you want using the number keys.

Number keys illustration

5Press the [Start] key.

Start key illustration

Printing starts automatically after the trial print.

Note

  • If you want to check the image before printing, press the [Auto Cycle] key before pressing the [Start] key, in order to disable Auto Cycle mode. See When Auto Cycle Mode Is Off.