3 Initial Setting

1

MSTR Makg.Density

You can specify the default setting for image density that is selected when the power is turned on.

Default: [Std.](Standard)

2

Original Priority

You can specify the original type that is selected by default when the power is turned on.

Default: [Letter]

3

Ratio Priority

You can specify the reproduction ratio that is selected by default when the power is turned on.

Default: [100 %]

4

Eco. Mode On/Off

You can specify whether to set Economy mode to [ON] or [OFF] when the power is turned on or the specified mode setting is cancelled.

Default: [OFF]

5

Margin Eras.Area

You can specify the edge erase margin. For details about specifying the edge erase margin, see Edge Erase Mode.

Default: [5 mm] (0.2 inches)

6

Margin Non-S.Size

You can use the number keys to specify the edge erase margin for an original of custom size.

Default: [70 × 165 mm] (2.8×6.5 inches)

7

Prog./Change:Clss

For details about storing the Class mode settings, see Memory/Class.

8

Prog./Change:Mem.

For details about specifying the Memory mode settings, see Memory/Class.

9

Prog/Change:Dept.

For details about specifying the settings for the Select Department mode settings, see Memory/Class.