Skip header
 

Top Page > Placing Originals > Placing Originals > Placing Originals in the ADF

Placing Originals in the ADF

Place originals in the ADF.

Place the original properly, and do not block the sensor. Otherwise, the machine may fail to detect the size of the original correctly, or a paper misfeed message will be displayed. Also, do not place originals or other objects on the top cover. Doing so may cause a malfunction.

ADF sensors illustration numbered callout illustration

  1. Sensors

1Adjust the guides to match the original size.

2Align the originals and place them in a stack face up.

Document feeder illustration

Note

  • Approximately 50 originals (80 g/m2 or 20 lb.) can be inserted at a time in the ADF. The first (top) original will be fed first.

  • To avoid misfeeds, fan the originals before placing them in the ADF.

  • Make sure the guides fit flush against both sides of the stack.