Entering a User Code to Use the Machine
If User Code mode is enabled, the machine will prompt you to enter your user code when you turn on the main switch, or after the machine has been reset.
Enter your three-digit user code using the number keys.
The user code will not be displayed on the panel display.
If you enter a wrong user code, press the [Clear/Stop] key and enter your user code again.
Press the [OK] key.
After printing, hold down the [Clear Modes/Energy Saver] key, and then press the [Clear/Stop] key.
User Code mode is set again. Other users will not be able to make prints using your user code.
The following user codes are available:
000, 019, 028, 037, 046, 055, 064, 073, 082, 091, 100, 119, 128, 137, 146, 155, 164, 173, 182, 191, 200, 219, 228, 237, 246, 255, 264, 273, 282, 291, 300, 319, 328, 337, 346, 355, 364, 373, 382, 391, 400, 419, 428, 437, 446, 455, 464, 473, 482, 491, 500, 519, 528, 537, 546, 555, 564, 573, 582, 591, 600, 619, 628, 637, 646, 655, 664, 673, 682, 691, 700, 719, 728, 737, 746, 755, 764, 773, 782, 791, 800, 819, 828, 837, 846, 855, 864, 873, 882, 891, 900, 919, 928, 937, 946, 955, 964, 973, 982, 991
