Repeat
Use this function to repeat an image twice on the same sheet of paper.
You cannot use the ADF with the Repeat function.
Press the [Combine/Repeat] key.
Use the [
] or [
] key to select [Repeat 2], and then press the [OK] key.
Set your original.
Make sure the [Master Making] mode select key is lit.
If it is not lit, press the [Master Making] mode select key.
Enter the number of prints you want using the number keys.
Press the [Start] key.
Printing starts automatically after the trial print.
You can choose to have either Combine or Repeat selected by default when the power is turned on. For details see 4 Mode Setting
.If you want to check the image before printing, press the [Auto Cycle] key before pressing the [Start] key, in order to disable Auto Cycle mode. See When Auto Cycle Mode Is Off
.
