Printing Problems

When you try to select several functions at the same time, some of them cannot be selected.

Some functions cannot be used together.

See Function Compatibility.

Parts of the image are not printed in Edge Erase mode.

The edge erase margin that you set is too wide.

Adjust the edge erase margin using the User Tools. See 3 Initial Setting.

Parts of the image are not printed in Edge Erase mode.

The original has very narrow margins.

Adjust the edge erase margin using the User Tools. See 3 Initial Setting.

Prints are blank, or parts of the image are not printed.

The paper feed side plates are not set correctly.

Make sure the paper feed side plates touch the paper lightly.

Printing in a second color is unsatisfactory.

The first color is still wet.

Wait until the first color becomes dry.

An uneven solid image appears.

A large solid image may produce wrinkles on the master.

Increase the printing speed or use Photo mode.