Top Page > Troubleshooting > If the Machine Does Not Work as Required > Indicators

Indicators

If a malfunction or misfeed occurs inside the machine, the following indicators will appear on the display.

When the misfeed indicator () lights up and the location indicators are displayed
Indicator	Reference
and "A"	See When "A" Is Displayed .
and "B"	See When "B" Is Displayed .
and "C"	See When "C" Is Displayed .
and "D"	See When "D" Is Displayed .
and "P"	See When "P" Is Displayed .
, "A" and "B"	See When "A, B" Are Displayed .
, "B" and "E"	See When "B, E" Are Displayed .

When the open cover/unit indicator () lights up and a message appears
Indicator	Message	Reference
	`“Doors/Covers open.”` `“Close Front cover.”`	See Front Cover Is Open .
and "P"	`“Doors/Covers open.”` `“Close ADF cover.”`	See ADF Cover Is Open .

When the master end indicator () lights up and a message appears
Indicator	Message	Reference
	`“Cover Open.”` `“Feeding cover is open.”` `“Please close.”`	See Master Feeding Cover Is Open .
	`“Master tray is not set.”` `“Set master tray.”`	See Master Tray Is Not Set Properly .
	`“Cover Open.”` `“Close Lower master tray.”`	See Lower Master Tray Is Open .

When the supply/exchange indicators light up
Indicator	Message	Reference
	`“Add paper.”`	See Adding Paper .
	`“Out of Ink”` `“Set new ink cartridge.”`	See Adding Ink .
	`“Out of masters.”` `“Set new master roll.”`	See Replacing the Master Roll .
	`“Master eject unit: Full”` `“Remove ejected masters.”`	See When the Master Eject Indicator Is Lit .

When other indicators light up
Indicator	Message	Reference
	`“Set the Key card/Key Counter.”`	See When the Set Key Counter Indicator Is Lit .