Adding Ink

The add ink indicator () lights up when it is time to add ink.

When removing jammed paper or replacing ink, avoid getting ink on your clothing. If ink comes into contact with your clothing, wash the stained area with cold water. Hot water will set the ink into the fabric and make removing the stain impossible.

When disposing of a used ink container, reattach the cap to prevent ink from scattering.

When removing jammed paper or replacing toner, avoid getting toner (new or used) on your skin. If toner comes into contact with your skin, wash the affected area thoroughly with soap and water.

If ink gets into contact with eyes, wash eyes immediately with running water. Consult a doctor if necessary.

If ink is ingested, induce vomiting by drinking a strong saline solution. Consult a doctor immediately.

Faults may occur if you use ink other than the recommended type.
Our products are engineered to meet high standards of quality and functionality. We recommend that you use only the expendable supplies available at an authorized dealer.

Open the front cover.

Front cover illustration

Pull out the ink holder.

Ink holder illustration

Remove the used ink cartridge.

Ink cartridge illustration

Remove the cap of the new ink cartridge.

Ink cartridge illustration

Hold the cartridge upright to prevent ink from spilling out.

Insert the new cartridge into the ink holder.

Ink cartridge illustration

Return the ink holder to its original position, and then push the ink holder until it clicks.

Always supply ink of the same color.

Make sure to firmly insert the part indicated by the arrow mark into the guide.

Ink holder illustration

Close the front cover.

The machine will start idling to supply ink to the drum.

Be sure to supply ink of the same color as the current drum.
Store ink in a cool, dry place. Do not store ink in a place exposed to heat or direct sunlight.
To prevent spilling of ink, place an ink on a flat surface.