Fine Mode
Use the [Fine] key to make clear prints.
Press the [Fine] key.
Set your original.
Make sure the [Master Making] mode select key is lit.
If it is not lit, press the [Master Making] mode select key.
Enter the number of prints you want using the number keys.
Press the [Start] key.
Printing starts automatically after the trial print.
If you want to check the image before printing, press the [Auto Cycle] key before pressing the [Start] key, in order to disable Auto Cycle mode. See When Auto Cycle Mode Is Off
.Fine mode and Economy mode cannot be used together. If you select both modes, Economy mode will be applied.
