No. |
Item |
Description |
---|---|---|
1 |
Check Counter |
You can check the number of masters and copies printed by each User Code. |
2 |
Reset Counters |
You can reset user code counters individually or all at one time. For details see User Code Default: [Single] |
3 |
Set User Code |
You can specify whether to enable User Code mode. Default: [Do not use] |
4 |
Key Counter Adj. |
Unless otherwise specified, an optional key counter is used to count the number of prints, regardless of the number of masters used. You can add a value between 0 and 50 to the key counter each time a new master is used. Default: [0] Range of adjustment: 0-50 |
5 |
UserTools Protect |
Prevent unauthorized users from accessing the initial (User Tools) menu. Default: [OFF] |
6 |
U.Tools ProtectPW |
Specify a four digit password to enable User Tools Protect. |