Skip header
 

Top Page > Getting Started > Guide to Components > Machine Interior

Machine Interior

Machine illustration numbered callout illustration

  1. Main switch

    Use this switch to turn the power on or off. See Turning On/Off the Power.

  2. Exposure glass

    Place originals face down on the exposure glass.

  3. Drum position indicator

    Indicates the drum is in the standard position when the upper lamp is on.

  4. Ink holder

    Place the ink cartridge in this holder.

  5. Drum unit lock lever

    Lift this lever to unlock and pull out the drum unit.

  6. Drum unit

    The master is wrapped around this unit.

  7. Chocks

    Use these to adjust the buffer fins.

  8. Paper delivery tray

    Prints are delivered here.

  9. Paper delivery end plate

    Use this plate to align the prints' leading edges.

  10. Master eject box

    Used masters are stored here.

  11. Paper delivery side plates

    Use these to align prints on the paper delivery tray.

  12. Paper alignment wings

    Lift or lower the wings according to the type of paper used.