Auto Quality Start
You can configure the machine to automatically perform idle spins. This is called Auto Quality Start.
To use the Auto Quality Start function, you set Auto Quality Start to [Yes] using the user tools. See 4 Mode Setting
.Specify the number of idle spins according to the length of time for which the machine is not used. The defaults are as follows:
Time interval
0 to less than 2 hours
2 to less than 4 hours
4 to less than 24 hours
24 hours or more
Temperature
Low Tmp. *1
0
2
3
3
Normal Tmp. *2
0
2
2
3
High Tmp. *3
0
2
2
3
*1 10–18°C (50–64.4 °F)
*2 18–28°C (64.4–82.4°F)
*3 28°C (82.4°F) or higher
