Top Page > Hardware Guide > All Titles
Positions of WARNING and CAUTION Labels
Manuals for This Printer
How to Read This Manual
Symbols
Model-Specific Information
List of Options
Installing the Operating Instructions
Exterior: Front View
Exterior: Rear View
Interior
Control Panel
Display Panel
Reading the Display and Using Keys
Available Options
Order of Option Installation
Where to Install Options
Cautions When Re-installing the Controller Board
Attaching the Paper Feed Unit
Installing the Memory Expansion Units
Installing the SDRAM Module
Installing the Hard Disk
Installing the Interface Units
Installing the Gigabit Ethernet Board
Installing the Wireless LAN Interface Board
Installing the IEEE 1284 Interface Board
Installing SD Card Options
Connecting the Printer Cables | ![Top of page](../../web/gen/i_top_t.gif) |
![](../../web/gen/titlebar.gif) |
Ethernet Cable Connection
Reading the LED Lamps
USB Cable Connection
Parallel Cable Connection
Ethernet Configuration
Specifying an IP Address (No DHCP)
Receiving an IP Address Automatically (DHCP)
Configuring Network Settings When Using NetWare
Setting the Ethernet Speed
Wireless LAN Configuration
Setting the SSID
Setting Security Method of Wireless LAN
Setting a WEP Key
Setting WPA
Configuring WPA/WPA2
Installing a Site Certificate
Installing Device Certificate
Setting Items of WPA/WPA2
Supported Paper for Each Tray
500-sheet Paper Trays
2000-sheet Paper Feed Unit
1200-sheet Paper Feed Unit
Bypass Tray
Paper Weight and Capacity
Paper Recommendations
Storing Paper
Types of Paper and Other Media
Paper Not Supported by This Printer
Print Area
Loading Paper
500-sheet Paper Feed Trays
2000-sheet Paper Feed Unit
1200-sheet Paper Feed Unit
Bypass Tray
Adding Toner
Replacing Maintenance Kit A
Replacing the Development Unit
Replacing Maintenance Kit B
Replacing the Transfer Unit
Replacing the Fusing Unit
Adding Staples
When the 1000-sheet Finisher is Installed
When the 2 Tray Finisher is Installed
Cautions When Cleaning
Cleaning the Friction Pads
500-sheet Paper Trays
2000-sheet Paper Feed Unit
1200-sheet Paper Feed Unit
Cleaning the Registration Roller
Adjusting Image Density
Adjusting Printing Position
Error and Status Messages Appears on the Control Panel
Panel Tones
Printer Does Not Print
Checking the Port Connection
Printing Problems
Additional Troubleshooting
Removing Jammed Staples
When the 1000-sheet Finisher is Installed
When the 2 Tray Finisher is Installed
Removing Punch Waste
When the 2 Tray Finisher is Installed
Removing Misfed Paper
Paper Misfeed Message (A)
Paper Misfeed Message (B)
Paper Misfeed Message (C)
Paper Misfeed Message (D)
Paper Misfeed Message (R)
When the 1000-sheet Finisher is Installed
When the 2 Tray Finisher is Installed
Paper Misfeed Message (Y)
Paper Misfeed Message (Z)
Paper Misfeed Message (U)
Duplex Print Always Misfeeds
Moving and Transporting the Printer
Moving the Printer
Consumables
Toner
Maintenance Kit
Staple Cartridge
Specifications
Mainframe
Options