Skip headerimage
ManualsContentsPreviousNextHelp

Adjusting Image Density

This section describes how to adjust image density.

After moving the printer, printing on thick paper, or printing repeatedly for some time, image degradation may occur. By performing automatic image adjustment, you can restore optimum print quality.

  1. Press the [Menu] key.

    Menu key illustration

  2. Press the [image] or [image] key to select [Maintenance], and then press the [OK] key.

    Operation panel screen illustration

  3. Press the [image] or [image] key, and then press the [OK] key to select [Quality Maintenance].

    Operation panel screen illustration

  4. Press the [image] or [image] key to select [Image Density Adjustment], and then press the [OK] key.

    Operation panel screen illustration

  5. Press the [image] or [image] key to select the image density, and then press [OK].

    Operation panel screen illustration

    Enter the value between -3 and 3.

    About two seconds later, the display returns to the [Quality Maintenance Menu] screen.

  6. Press the [Menu] key.

    The display returns to the initial screen.