Top Page > Troubleshooting

Troubleshooting

If the Machine Does Not Work as Required

Indicators

Printing Problems

When the Open Cover/Unit Indicator Is Lit

Front Cover Is Open

ADF Cover Is Open

When the Master End Indicator Is Lit

Master Feeding Cover Is Open

Master Tray Is Not Set Properly

Lower Master Tray Is Open

When the Master Eject Indicator Is Lit

When the Set Key Counter Indicator Is Lit

When Prints Are Not Properly Ejected onto the Paper Delivery Tray

Low Print Quality

Dirt on the Back Side of the Paper

Dirt on the Front Side of Paper (Black Line/Stain)

Blank Prints or Incomplete Prints

Clearing Misfeeds

Removing Jammed Paper