Top Page > Getting Started
Getting Started |
|
Installing the Machine
Where to Put the Machine
Unpacking
Turning the Power on
Initial Setup
Changing Operation Modes
Saving Energy
Multi-Access
Connecting the Machine
Connecting with USB Cable
Connecting with Network Cable
Reading the LED Lamps
Connecting to a Telephone Line
Configuring the Machine
Configuring Network Settings
Setting the machine to receive an IP address automatically
Assigning the machine's IP address manually
Configuring Telephone Network Settings
Selecting the telephone line type
Selecting the telephone network connection type
Setting the outside line access number
Sharing the Printer on a Network
Installing Options
Installing the Paper Feed Unit TK1010 (Tray 2)
Installing the Memory Unit Type F 256MB (DDR-SDRAM Module)
Paper and Other Media
Supported Paper for Each Tray
Specifications of Paper Types
Unsupported Types of Paper
Paper Storage Precautions
Printable Area
Loading Paper
Loading Paper in Tray 1
Loading Legal size paper
Loading envelopes
Loading Paper in the Optional Paper Feed Unit
Loading Paper in the Bypass Tray
Specifying Paper Type and Paper Size
Specifying the paper type
Specifying the standard paper size
Specifying a custom paper size
Placing Originals
About Originals
Recommended size of originals
Types of originals not supported by the Auto Document Feeder
Unscannable image area
Placing Originals
Placing originals on the exposure glass
Placing originals in the Auto Document Feeder
Entering Characters
Value Input Mode
Fax Number Input Mode
Text Input Mode