Skip headerimage
ContentsPreviousNextHelp

Text Input Mode

Text input mode becomes active when entering names.

Available characters

Letters, numbers, and symbols can be entered.

image

In this mode, use the keys as follows:

  • To enter a character

    Press a number key repeatedly until the desired character appears.

    When entering two characters that use the same number key successively, press the [Down arrow key] key after entering the first character.

  • To insert a space

    Place the cursor where you want to insert a space, and then press and hold the [Down arrow key] key until a space is inserted. To enter a space at the right-most position, press the [Down arrow key] key twice.

  • To move the cursor left or right

    Press the [Up arrow key] key to move the cursor left, and the [Down arrow key] key to move the cursor right.

    If you enter a character when there is a character at the cursor position, the current character shifts to the right.

  • To delete a character

    Place the cursor on the character you want to delete, and then press and hold the [Up arrow key] key until the character is deleted.

  • To delete all characters

    Press the [Clear/Stop] key.

Note

  • When the maximum number of characters has already been entered, characters entered subsequently are ignored.