Menu Items and Functions

0101

[Image Position: With Feed]

Adjust the horizontal position of the print image.

0102

[Image Position: Across Feed]

Adjust the vertical position of the print image.

0103

[Erase Margin: Leading Edge/Trailing Edge]

Adjust the mask width at the leading edge, trailing edge, left edge, or right edge of the image.

0201

[Adjust Image Density/ DEMS]

Execute image density control manually.

DEMS can reduce the variations in thickness that occur in the intervals between the photoconductor and development sleeve operations.

0202

[Image Density Adjustment Execute Interval]

Specify the number of sheets the machine prints in full color before it automatically adjusts image density.

0203

[Maximum Image Density]

Specify the adhesion of toner to the drum surface and intermediate transfer belt when image density adjustment is executed.

0204

[Line Width]

Adjust the intensity of the laser for transferring image data to the drum.

0205

[Density Difference: Across Feed]

Adjust the image density difference between the top and bottom of the image.

0207

[Fusing Temperature on Standby]

Adjust the set fusing temperature according to the machine status.

0209

[Photoconductor Special Mode]

Increase the amount of lubricant applied to the photoconductor.

0210

[Smooth Fusing Belt]

Polish the fusing belt to eliminate the scratches caused by paper edges.

0211

[Fusing Ability by Feed Speed]

Specify appropriately to improve transferability to thick paper.

0212

[Slope for Envelope Nip Width]

Adjust the slope for nip width between the fusing belt and the pressure roller when an envelope is being fed.

0213

[PCU Potential]

Adjust the current supplied to the photoconductor unit at high temperature and humidity.

0214

[Fusing Belt Smoothing Setting: Uneven Gloss]

Specify whether or not to automatically execute [For Uneven Gloss (Short Time)] for smooth fusing belt.

0301

[Registration Gate: Paper Buckle Amount]

Adjust the allowable amount of buckle when the edge of the paper is pressed against the registration unit.

Adjust the allowable amount of buckle for paper of Paper Weight 5 to 9 when the edge of the paper is pressed against the registration unit.

0302

[Registration Gate: Paper Buckle Amount: Paper Weight]

0303

[Criteria for Paper Weight]

Adjust the criteria used to determine the paper weight.

0304

[Fan for Cooling Paper Inside: Fan Level]

Tighten the cleaning web after replacing it.

0305

[Perpendicularity Adjustment]

Adjust the vertical skew of the image.

0306

[Buffer Pass Unit Fan Activation Setting]

Select when the buffer pass unit fan is to operate.

0307

[Connection Unit: Registration Gate: Paper Buckle Amount]

To correct skew, adjust the paper bending allowance at registration.

0308

[Connection Unit: Registration Gate Home Position]

Adjust optimum value to increase the accuracy of Skew Correction depending on paper weight.

0309

[Connection Unit: Detect/Control JAM048/049]

Set ON/OFF for J048 (detect paper jam by detection error of image position correction mark) and J049 (detect paper jam by deviation amount in feeding direction).

0310

[Double Feed Detection]

Specify whether or not to detect double feeding of paper.

0311

[Adjust Feed Interval]

Specify whether or not to prevent sheets of paper from passing each other at the exit switchback.

0401

[Auto Color Selection Setting]

Specify the number of sheets the machine prints in full color mode before switching to black-and-white mode when printing a job which involves full color printing followed by black-and-white printing.

0501

[Execute Cleaning Initial Setting]

Initialize the cleaning unit for the photoconductor unit (PCU).

0502

[Execute Process Initial Setting]

Initialize print settings at once.

0503

[ITB Manual Lubrication]

Lubricate the intermediate transfer belt.

0504

[Tighten Fuser Cleaning Unit at Replacement]

Tighten the cleaning web after replacing it.

0505

[Reset Replaceable Parts Counter]

Counter Reset the counter for replaceable parts.

0506

[Replaceable Parts Counter]

Display the counters for replaceable units.

0507

[Target Value for Replaceable Part]

Display the values at which replaceable units must be replaced.

0508

[Execute Charge Roller Cleaning]

Clean the charge roller unit.

0509

[Execute Developer Refreshing]

Replenish the developer manually.

Replace part of the developer in the development unit.

0510

[Counter Settings for Fuser Unit Replacement]

Display the counter for the fuser unit replacement.

0511

[Temperature / Humidity outside the Machine]

Display the external temperature and humidity.

0512

[Back Up / Restore Custom Paper Data]

Back up and restore custom paper profiles.

0513

[Switch Print Screen]

Switch to the print screen if you want to output an alignment pattern to check image misalignment with the color controller connected.

0601

[Wide LCT: Fan Level]

Adjust the airflow of the wide LCT for fanning the sheets.

0602

[Wide LCT: Fan Timer]

Adjust the duration of the airflow of the wide LCT for fanning the sheets.

0603

[Pickup Assist]

Specify the paper feed roller movement.

0701

[Punch Position: With Feed]

Adjust the horizontal position of the punch holes when using Finisher SR5090 or Booklet Finisher SR5100.

0702

[Punch Position: Across Feed]

Adjust the vertical position of the punch holes when using Finisher SR5090 or Booklet Finisher SR5100.

0703

[Staple Position]

Adjust the vertical position of the staples when using Finisher SR5090 or Booklet Finisher SR5100.

0704

[Staple Position for Booklet]

Adjust the horizontal position of the booklet staples when using Booklet Finisher SR5100.

0705

[Folding Position for Booklet]

Adjust the horizontal folding position when using Booklet Finisher SR5100.

0706

[Folding Speed for Booklet]

Adjust the speed of center folding by the Booklet Finisher SR5100. By reducing the folding speed, you can make folds crisper.

0707

[Amount of Punch Skew Correction]

Adjust skew correction for punching in order to reduce punch skew due to difference in size, thickness, and paper curl when using Finisher SR5090 or Booklet Finisher SR5100.

0708

[Punch Skew Correction]

Disable punch skew correction function if jams or edgefolding problems occur particularly when punching lightweight paper using Finisher SR5090 or Booklet Finisher SR5100.

0709

[Paper Alignment in Shift Tray: Across Feed]

Adjust the width of the paper alignment jogger in the shift tray in order to reduce vertical variation in paper alignment due to difference in size, thickness, and paper curl when using Finisher SR5090 or Booklet Finisher SR5100.

0710

[Paper Alignment for Stapling: Across Feed]

Adjust the width of the staple jogger for edge stapling in order to reduce vertical variation in paper alignment due to difference in size, thickness, and paper curl when using Finisher SR5090 or Booklet Finisher SR5100.

0711

[Paper Alignment for Booklet: Across Feed]

Adjust the width of the staple jogger for booklets in order to reduce vertical variation in paper alignment due to difference in size, thickness, and paper curl when using Booklet Finisher SR5100.

0712

[Paper Tapping for Extra Feed for Stapling]

Adjust the paper tapping for extra paper feed to the paper guide for stapling.

Adjust this setting if the paper delivered to the paper guide for stapling overshoots or stops short of the guide.

0713

[Claw Shift for Center Folding]

Adjust the paper alignment in the paper feed direction for center folding.

Adjust this setting if the paper alignment in the paper feed direction is inaccurate because of inconsistent paper size and paper curling when using certain types of paper.

0714

[Number of Sheets Align for Stapling]

Set no. of sheets to align for Stapling at one time.

0715

[Number of Sheet Align for Booklet]

Set no. of sheets to align for booklet at one time.

0801

[Staple Position: Across Feed 1]

Adjust the vertical position of the staple (applied at an edge) when using Finisher SR5110 or Booklet Finisher

SR5120.

0802

[Staple Position: Across Feed 2]

Adjust the vertical position of the staples (dual) when using Finisher SR5110 or Booklet Finisher SR5120.

0803

[Staple Position: With Feed]

Adjust the horizontal position of the staples when using Finisher SR5110 or Booklet Finisher SR5120.

0804

[Paper Alignment for Stapling: Across Feed: 1st Time]

Adjust the width of the staple jogger for edge stapling when using Finisher SR5110 or Booklet Finisher SR5120.

0805

[Paper Alignment for Stapling: Across Feed: 2nd Time]

0806

[Paper Alignment for Stapling:Paper Weight:Across Feed:1st]

Adjust the width of the Staple Jogger to reduce the dispersion of paper orientation in right angle for each paper weight when using Finisher SR5110 or Booklet Finisher SR5120.

0807

[Paper Alignment for Stapling:Paper Weight:Across Feed:2nd]

0808

[Paper Alignment for Stapling: With Feed: 1st Time]

Adjust the travel distance of the paper edge stopper for edge stapling when using Finisher SR5110 or Booklet Finisher SR5120.

0809

[Paper Alignment for Stapling: With Feed: 2nd Time]

0810

[Paper Alignment for Stapling:Paper Weight:With Feed:1st]

Adjust Tip Stopper movement when using Edge Stapling when using Finisher SR5110 or Booklet Finisher SR5120.

0811

[Paper Alignment for Stapling:Paper Weight:With Feed:2nd]

0812

[Number of Sheet Align for Stapling]

Specify the number of sheets the staple unit aligns at a time for stapling.

0813

[Punch Position: Across Feed]

Adjust the vertical position of the punch holes when using Finisher SR5110 or Booklet Finisher SR5120.

0814

[Punch Position: With Feed]

Adjust the horizontal position of the punch holes when using Finisher SR5110 or Booklet Finisher SR5120.

0815

[Correct Punch Skew]

Specify whether or not to enable punch skew correction when using Finisher SR5110 or Booklet Finisher SR5120.

0816

[Amount of Punch Skew Correction]

Adjust the amount of skew correction for punching when using Finisher SR5110 or Booklet Finisher SR5120.

0817

[Paper Alignment in Shift Tray Setting]

Specify the accuracy of printed paper alignment when applying shift-sorting with Finisher SR5110 or Booklet Finisher SR5120.

0818

[Paper Alignment in Shift Tray Setting: Stapled Signature]

Set the alignment precision of output sheets during Shift Sorting.

This function can be used with Finisher SR5110 or Booklet Finisher SR5120.

0819

[Paper Alignment in Shift Tray Setting: Thin Paper]

Set the alignment precision of output sheets to reduce the curl of thin paper ejected on the Shift Tray.

This function can be used with Finisher SR5110 or Booklet Finisher SR5120.

0820

[Paper Alignment in Shift Tray: Across Feed]

Adjust the width of the paper alignment jogger in the shift tray when using Finisher SR5110 or Booklet Finisher SR5120.

0821

[Output Tray Descending Position]

Specify the descending position for the finisher shift tray when paper is delivered to it using Finisher SR5110 or Booklet Finisher SR5120.

0822

[Output Trail Edge Press Setting]

Specify whether or not to press down the trailing edge of the paper when it is delivered to the finisher shift tray of Finisher SR5110 or Booklet Finisher SR5120.

0823

[Output Fan Setting]

Specify how the shift tray fan moves when using Finisher SR5110 or Booklet Finisher SR5120.

0824

[Output Fan Level]

Adjust the airflow of the shift tray for fanning the sheets when using Finisher SR5110 or Booklet Finisher SR5120.

0825

[Staple Position for Booklet]

Adjust the horizontal position of the booklet staples when using Booklet Finisher SR5120.

0826

[Folding Position for Booklet]

Adjust the horizontal position of the folding when using Booklet Finisher SR5120.

0827

[Paper Alignment for Booklet: Across Feed]

Adjust the width of the staple jogger for booklets when using Booklet Finisher SR5120.

0828

[Folding Speed for Booklet]

Specify the number of booklet folds to be performed when using Booklet Finisher SR5120.

0829

[Paper Alignment for Booklet: With Feed]

Adjust the travel distance of the paper edge stopper for booklets when using Booklet Finisher SR5120.

0830

[Feed Amount of Folding Roller for Booklet]

Adjust feed amount of the folding roller for a booklet.

This function can be used with Booklet Finisher SR5120.

0831

[Convert Number of Sheets for Booklet]

Set the convert number of sheets for a booklet.

This function can be used with Booklet Finisher SR5120.

0832

[Z-fold Skew Correction]

Specify how to correct skew (occurring during paper transport) when Z-folding with the folding unit.

0833

[Amount of Z-fold Skew Correction]

Adjust the length of sheets moved for Z-fold skew correction.

0834

[Amount of Z-fold Skew Correction: Reverse]

Adjust how much the registration roller rotates in reverse for Z-fold skew correction.

0835

[Maximum No. Stacked Sheets in Output Tray]

Specify the amount of paper stacked in Finisher SR5110 or Booklet Finisher SR5120.

0836

[Max. No. Stacked Sheets in Output Tray: Stapled Signature]

Set the proper number of stapled sheets for each paper size to stack on the shift tray. This function can be used with Finisher SR5110 or Booklet Finisher SR5120.

0837

[Maximum No. Stacked Sheets in Output Tray: Envelope]

Set the proper number of envelopes for each envelope size to stack on the shift tray. This function can be used with Finisher SR5110 or Booklet Finisher SR5120.

0838

[Accuracy Priority for Stapling]

Set the accuracy priority for stapling. This function can be used with Finisher SR5110 or Booklet Finisher SR5120.

0839

[Accuracy Priority for Booklet]

Set the accuracy priority for a booklet.

This function can be used with Booklet Finisher SR5120.

0840

[Staple Tray: Rib Installed Mode to Strengthen Paper]

Set the operation when the Paper Strengthening Rib is installed to Staple Tray. This function can be used with Finisher SR5110 or Booklet Finisher SR5120.

0841

[Paper Alignment Gap for Stapling]

Adjust the paper alignment gap for stapling.

0842

[Paper Alignment Angle in Shift Tray]

Adjust the angle of the paper alignment jogger of the shift tray when attaching the support tray.

0843

[Prevent Misdetection of Punched Hole]

Specify this setting if roller stains or paper jams occur when delivering punched paper.

0901

[Z-fold Position 1]

Adjust the width of the bottom end segment of Z-folded sheets when using the multi-folding unit.

0902

[Z-fold Position 2]

Adjust the overall fold size of Z-fold sheets when using the multi-folding unit.

0903

[Half Fold Position: 1 sheet Fold]

Adjust the fold position of half folded sheets when using the multi-folding unit.

0904

[Half Fold Position: Multi-sheet Fold]

0905

[Letter Fold-out Position 1: 1 sheet Fold]

Adjust the fold position for the bottom segment of letter fold-out sheets when using the multi-folding unit.

0906

[Letter Fold-out Position 1: Multi-sheet Fold]

0907

[Letter Fold-out Position 2: 1 sheet Fold]

Adjust the overall fold size of letters fold-out sheets when using the multi-folding unit.

0908

[Letter Fold-out Position 2: Multi-sheet Fold]

0909

[Letter Fold-in Position 1: 1 sheet Fold]

Adjust the fold position of the bottom segment of letter fold-in sheets when using the multi-folding unit.

0910

[Letter Fold-in Position 1: Multi-sheet Fold]

0911

[Letter Fold-in Position 2: 1 sheet Fold]

Adjust the fold position of letters fold-in sheets when using the multi-folding unit.

0912

[Letter Fold-in Position 2: Multi-sheet Fold]

0913

[Double Parallel Fold Position 1]

Adjust the first folding position when Parallel Folding is done by the Paper Folding Unit.

0914

[Double Parallel Fold Position 2]

Adjust the second folding position when Parallel Folding is done by the Paper Folding Unit.

0915

[Gate Fold Position 1]

Adjust the folding position on the front end side when Gate Folding is done by the Paper Folding Unit.

0916

[Gate Fold Position 2]

Adjust the folding position on the rear end side when Gate Folding is done by the Paper Folding Unit.

0917

[Gate Fold Position 3]

Adjust the center folding position when Gate Folding is done by the Paper Folding Unit.

0918

[Folding Unit Tray Full Detection]

Specify whether or not to automatically detect when the folding unit tray becomes full.

0919

[Number of Sheets Folded after Full Detection]

Specify the number of sheets the machine prints when it detects that the folding unit tray is full before displaying a warning message.

1001

[Paper Alignment in Stacker Tray: Across Feed 1]

Adjust the alignment width in Main Jogger at the Stacker to reduce dispersion of sheets at right angles due to paper size, thickness, curl, etc.

1002

[Paper Alignment in Stacker Tray: Across Feed 2]

Adjust the alignment width in Sub Jogger at the Stacker to reduce dispersion of sheets at right angles due to paper size, thickness, curl, etc.

1003

[Paper Alignment in Stacker Tray: With Feed]

Adjust the alignment position of the Tip Stopper at the Stacker to reduce variations of paper orientation in the feeding direction due to paper size, thickness, curl, etc.

1004

[Maximum Stack Quantity in Stacker Tray]

Specify the maximum number of sheets that can be stacked on the stacker tray.

2101

[Interposer: Double Feed Detection]

Specify the double-feed detection setting for the Twin interposer.

2102

[Interposer: Fan Setting]

Specify the fan operation of Twin interposer.

2103

[Interposer: Fan Level]

Adjust the fan volume for the Twin interposer to separate sheets of paper in close contact.