[21: Finishing: Interposer]
2101: [Interposer: Double Feed Detection]
Specify whether to perform double-feed detection for the paper fed from the tray.
Setting Item | Values | Default Value |
|---|---|---|
[Interposer Upper Tray] [Interposer Lower Tray] | [On] [Off] | [Off] |
2102: [Interposer: Fan Setting]
Specify the fan operation of Twin interposer.
When it is [On], air is blown to the edge of sheets to separate them in close contact.
Setting Item | Values | Default Value |
|---|---|---|
[Interposer Upper Tray] [Interposer Lower Tray] | [Auto] [On] [Off] | [Off] |
2103: [Interposer: Fan Level]
Adjust the fan volume for the Twin interposer to separate sheets of paper in close contact.
Press [
] or [
] to increase or decrease the air flow.
Setting Item | Default Value | Max. Value | Min. Value | Step | Unit |
|---|---|---|---|---|---|
[Interposer Upper Tray] [Interposer Lower Tray] | 0 | 90 | 0 | 10 | % |