[01: Machine: Image Position]
0101: [Image Position: With Feed]
Adjust the horizontal position of the print image.
You can make this adjustment to Side 1 on an individual tray basis, but not to Side 2.
Side 1
Press [+] to shift the image to the right (trailing edge).
Press [−] to shift the image the left (leading edge).
Side 2
Press [+] to shift the image to the left (trailing edge).
Press [−] to shift the image to the right (leading edge).
Setting Items | Default Value | Max. Value | Min. Value | Step | Unit |
|---|---|---|---|---|---|
[Tray 1] | *1 | 9.0 | -9.0 | 0.1 | mm |
[Tray 2] | |||||
[Tray 3] | |||||
[Bypass Tray] | |||||
[2 Sided] | |||||
[LCT] | |||||
[Tray A] | |||||
[Tray T1] | |||||
[Tray T2] | |||||
[Paper Weight 1] | |||||
[Paper Weight 2] | |||||
[Paper Weight 3] | |||||
[Paper Weight 4] | |||||
[Paper Weight 5] | |||||
[Paper Weight 6] | |||||
[Paper Weight 7] | |||||
[Paper Weight 8] | |||||
[Paper Weight 9] | |||||
[Bypass Tray: Paper Weight 1] | *1 | 9.0 | -9.0 | 0.1 | mm |
[Bypass Tray: Paper Weight 2] | |||||
[Bypass Tray: Paper Weight 3] | |||||
[Bypass Tray: Paper Weight 4] | |||||
[Bypass Tray: Paper Weight 5] | |||||
[Bypass Tray: Paper Weight 6] | |||||
[Bypass Tray: Paper Weight 7] | |||||
[Bypass Tray: Paper Weight 8] | |||||
[Bypass Tray: Paper Weight 9] |
*1 The factory-set value is preset.
If paper is delivered face-down, turn it over in the paper feed direction and check the image position.
If the leading-edge margin on Side 1 of the paper is too narrow, paper jams may occur.
If the trailing-edge margin on Side 1 of the paper is too narrow, paper jams may occur when printing on the back side of paper during duplex printing.
For printing from a paper tray with custom paper, the values specified in [Adj Image Position of Side1 With Feed] and [Adj Image Position of Side2 With Feed] within [Advanced Setting] for the custom paper will be added.
This adjustment may have no effect, depending on how this machine is configured.
0102: [Image Position: Across Feed]
Adjust the vertical position of the print image.
Side 1
Press [+] to shift the image to the top.
Press [−] to shift the image to the bottom.
Side 2
Press [+] to shift the image to the top.
Press [−] to shift the image to the bottom.
Setting Items | Default Value | Max. Value | Min. Value | Step | Unit |
|---|---|---|---|---|---|
[Tray 1] | *1 | 4.0 | -4.0 | 0.1 | mm |
[Tray 2] | |||||
[Tray 3] | |||||
[Bypass Tray] | |||||
[2 Sided] | |||||
[LCT] | |||||
[Tray A] | |||||
[Tray T1] | |||||
[Tray T2] | |||||
[Paper Weight 1] | |||||
[Paper Weight 2] | |||||
[Paper Weight 3] | |||||
[Paper Weight 4] | |||||
[Paper Weight 5] | |||||
[Paper Weight 6] | |||||
[Paper Weight 7] | |||||
[Paper Weight 8] | |||||
[Paper Weight 9] |
*1 The factory-set value is preset.
If paper is delivered face-down, turn it over in the paper feed direction and check the image position.
For printing from a paper tray with custom paper, the values specified in [Adj Image Position of Side1 Across Feed] and [Adj Image Position of Side2 Across Feed] within [Advanced Setting] for the custom paper will be added.
This adjustment may have no effect, depending on how this machine is configured.
0103: [Erase Margin: Leading Edge/Trailing Edge]
Adjust the mask width at the leading edge, trailing edge, left edge, or right edge of the image.
By increasing the mask width, you can increase the paper margin at the leading edge, trailing edge, left edge, or right edge of the paper.
If misfeeding of paper occurs when using loose paper such as thin or coated paper, increase the mask width. This will increase the unprinted area at the leading edge, trailing edge, left edge, or right edge of the paper and facilitate paper separation from the fusing belt.
Press [+] or [−] to adjust the mask width.
Setting Items | Default Value | Max. Value | Min. Value | Step | Unit |
|---|---|---|---|---|---|
[Adjust Erase Margin of Leading Edge] | 0.0 | 6.0 | -3.0 | 0.1 | mm |
[Adjust Erase Margin of Trailing Edge] | 0.0 | 6.0 | -9.0 | 0.1 | mm |
[Adjust Erase Margin of Left Edge] | 0.0 | 6.0 | -9.0 | 0.1 | mm |
[Adjust Erase Margin of Right Edge] | 0.0 | 6.0 | -9.0 | 0.1 | mm |
This setting is not effective for paper fed from paper trays with custom paper presets. For such paper, the value specified in [Adjust Erase Margin of Leading Edge], [Adjust Erase Margin of Trailing Edge] in [Advanced Settings] takes precedence.