Fold

You cannot use the following paper with this function:

• OHP transparencies

• Thick paper

• Thin paper

• Tab stock

• Translucent paper

• Label paper (adhesive labels)

• Envelope

For details about which sizes and weights of paper that can be folded, see “Specifications for Multi-Folding Unit (Optional)”, About This Machine.

The printed side of the paper may occasionally be scratched or stained with toner depending on the paper and the conditions of the machine's environment.

Print quality over fold lines might be reduced. This is due to cracking within the fused toner. Loss of surface along fold lines can also occur with some types of paper. To avoid possible wastage, print a single test sheet before beginning a print run.

Copying will stop if the number of copies exceeds tray capacity. If this happens, remove copies from the folding unit tray to resume copying.

The capacity of the folding unit tray may vary depending on the fold settings and the condition of the paper.

You can change the fold types shown on the initial display under Input / Output in User Tools. For details, see Input / Output.