Applies two parallel folds to create four panels (center line main fold, double panel fold).
Press [Output/ Customize Function/ Finisher].
Press [Fold].
Press [Dble. Parallel Fold].
Press [Change].
Select Fold Orientation, Open Orientation, and Print Side.
Press [OK] twice.
Place the originals, and then press the [Start] key.
Folded documents are delivered to the multi-folding unit only.
You can specify the fold-back position in 1 mm (0.04 inches) increments under Double Parallel Fold Position in User Tools. For details about Double Parallel Fold Position, see “System Settings”, Network and System Settings Reference.
If the Booklet or Magazine function is set, the settings for those functions have priority.
The following copier functions are not available when the Double Parallel Fold function is enabled:
Punch
Staple
Multi-sheet Fold