Using Internet fax

Use the following procedure to configure the machine for use as an Internet fax.

To use this function with GX 3000SF, the network interface board must be installed.

Connect the machine to the network.
Specify the network settings, such as the machine's IP address and the gateway address.
Specify the SMTP settings, such as the sender name, SMTP server and the SMTP port number.
Specify the POP3 settings, such as the POP3 server and the POP3 port number.
Begin using the facsimile.

For details about procedures and settings in step 1, see “Installing the Printer Driver (Network Interface Board)”, Quick Installation Guide.
For details about procedures and settings in step 2, see Network Settings.
For details about procedures and settings in step 3, see Settings Required to Send Internet Fax and E-mail.
For details about procedures and settings in step 4, see Settings Required to Receive Internet Fax and E-mail.
For details about procedures and settings in step 5, see Registering Addresses, Internet Fax Functions.