Sending faxes from a computer

Use the following procedure to configure the machine for use as a facsimile, so users can send documents that they have created using a Windows application to fax machine.

Use a USB cable to connect the machine to a computer.
Install the LAN-Fax driver and any other necessary drivers on the computer.
If you are using the LAN-fax driver via network connection, make the necessary network settings, such as the machine's IP address.
Begin using the facsimile.

For details about procedures and settings in step 1, see “Before installing the Printer Driver (USB)”, “Installing the Printer Driver (Network Interface Board) ”, Quick Installation Guide.
For details about procedures and settings in step 2, see Confirming the Connection Method, “Quick Install for USB”, “Quick Install for Network”, Quick Installation Guide, Installing the Drivers for Local Connection, Installing the Drivers for Network Connection.
For details about procedures and settings in step 3, see Network Settings.
For details about procedures and settings in step 4, see Sending Fax Documents from Computers.