Contents
Previous
Next
| | | |
| |||
| |||
| | | |
| ContentsPreviousNext | | |
Use the following procedure to configure the machine for use as a facsimile with an external telephone.
Connect the machine to the telephone line.
Connect this machine to a telephone.
Make settings for line type.
Make settings for transmission.
Make settings for reception, such as the reception mode.
Register the destinations to Address Book if necessary.
Begin using the facsimile with the external telephone.
In step 3, the fax number and the date and time of transmission must be included in the header of all pages faxed to, from, or within the United States.
For details about procedures and settings in step 1, see Connecting a Telephone Line.
For details about procedures and settings in step 2, see Connecting a Telephone.
For details about procedures and settings in step 3, see Selecting the Line Type, Specifying the Line Type.
For details about procedures and settings in step 4, see Settings to Send Fax, Registering Fax Information.
For details about procedures and settings in step 5, see Settings to Receive Fax.
For details about procedures and settings in step 6, see Registering Addresses.
For details about procedures and settings in step 7, see Before Sending a Fax, Before Receiving a Fax.
 |
 | Copyright (C) 2006, 2007 All rights reserved. |
