User GuideIM C2000/C2500/C3000/C3500/C4500/C5500/C6000 series

Display/Input

This section describes the settings in [Display/Input] under [System Settings].

Introduction of Two Types of Setting Screens (Standard/Classic)

Display

Items

Description

Brightness

  • Brightness

    Adjust the brightness of the screen on the control panel.

  • Auto Dim Screen if it is Not Used For a While

    Specify whether to lower lighting when an operation has not been performed for a minute.

    • Default: [ON]

Screen Color Setting

Select the screen color of the classic application or document server.

  • Default: [Blue-gray]

Display IP Address

Specify whether to display the IPv4 Address and Host Name of the machine on the system bar.

  • Default: [Do not Display]

Function Priority

Specify the mode to be displayed automatically when the power is turned on or when the machine is not used for a while.

  • Default: [Home]

Select Switchable Languages

Specify the languages registered to [Settings][Change Language] and Change Languages widget.

Measurement Unit

Specify the unit of the paper size displayed on the control panel.

  • Default: [mm]

Application Display Settings by Function

Specify whether to hide all applications related to a specific function. For example, when you specify to hide [Copier Application], not only [Copy] but also [ID Card Copy] are not displayed.

In the default setting, all functions are displayed.

System Bar Settings

Specify the content displayed on the system bar and how to display it. You can change the following items:

  • Time to switch the display of messages

  • Whether to display the function key enlarged from the top of the screen

  • Whether to highlight the Login key and Energy Saving key

  • Whether to display the toner remaining instead of the clock.

Home Screen Blank Pages

Specify whether to allow a blank page with no icons to be displayed as the Home screen. You can use this function in the machines installed with RICOH Always Current Technology v1.2 or later.

  • Default: [Display Blank Pages]

Key/Keyboard/Input Assistance

Items

Description

Function Key Settings

Specify the function to assign the function key. The function key is specified inactive.

If setting this to [On], specify the functions to assign to the function keys.

  • Default: [Off]

You can change the displayed name by setting [Change Display Name] to [Change] for each function key.

If you do this, the displayed name stays the same even if you change the display language. In contrast, if you set [Change Display Name] to [Do not Change], the displayed name changes to the name in the selected language if you change the display language.

You can use this function in the machines installed with RICOH Always Current Technology v1.2 or later.

  • Default: [Do not Change]

Assigning Frequently Used Functions to the Function Keys

[Back] Key

Specify whether to enable [Back] to return to the previous screen. [Back] may not function regardless of this setting depending on the type of application or displayed content.

  • Default: [Active]

Word List

You can register words in the user dictionary. The registered words are displayed as input candidates for entering text on the keyboard of the control panel. Press [Register/Change] on the top right of the screen and register words.

This function is enabled when [On] is specified in [Show correction suggestions] in [Control Panel Keyboard].

Keyboard & Input Methods

Default Keyboard

  • Hardware

    Select whether to display the keyboard on the screen when an external keyboard is connected to the machine.

  • Current Keyboard

    Select the keyboard to use for entering text.

    • Default: [Control Panel Keyboard]

    Changing the Keyboard Type and Settings

Switchable Keyboard Settings

  • Control Panel Keyboard

    Specify advanced settings for the keyboard of the control panel, including the input language and key layout.

  • iWnn IME

    Specify whether to enable or disable the iWnn IME.

  • iWnn IME Settings

    Specify the settings for the iWnn IME, including the input language and key layout.

Register/Change/Delete User Text

Specify text phrases to insert when entering text. You can use these text phrases when operating classic mode applications or the setting screen (Classic). When you register a domain, such as "co.jp" or ".com", or preface text, you can use it to send the scanned original by e-mail. You can register up to 40 entries.

Key Repeat

Specify the period to identify that a key is pressed repeatedly when you keep pressing the screen. The key repeat function is available only when using the classic application or document server.

  • Default: [Normal]