Skip header
 

Guide to Functions of the Machine's External Options

Illustration of external options numbered callout illustration

  1. Booklet Finisher SR5120

    Sorts, stacks, and staples multiple sheets of paper. The saddle stitch function can staple multiple sheets of paper in the center and fold them into booklets. Consists of the following paper trays:

    • Finisher shift tray 1

    • Finisher shift tray 2

    • Finisher booklet tray

    Prints can be punched if the optional punch unit is installed on the finisher.

    Depending on when the machine was bought, this option may not be available. For details, contact your service representative.

  2. Trimmer unit TR5050

    Cuts the fore edge of the book block after the book block is saddle stitched.

    Booklet Finisher SR5120 is required in order to attach this.

    Depending on when the machine was bought, this option may not be available. For details, contact your service representative.

  3. Finisher SR5110

    Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:

    • Finisher shift tray 1

    • Finisher shift tray 2

    Prints can be punched if the optional punch unit is installed on the finisher.

    Depending on when the machine was bought, this option may not be available. For details, contact your service representative.

  4. Booklet Finisher SR5060

    Sorts, stacks, and staples multiple sheets of paper. The saddle stitch function can staple multiple sheets of paper in the center and fold them into booklets. Consists of the following paper trays:

    • Finisher upper tray

    • Finisher shift tray

    • Finisher booklet tray

    Prints can be punched if the optional punch unit is installed on the finisher.

  5. Trimmer unit TR5040

    Cuts the fore edge of the book block after the book block is saddle stitched.

    Booklet Finisher SR5060 is required in order to attach this.

  6. Finisher SR5050

    Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:

    • Finisher upper tray

    • Finisher shift tray

    Prints can be punched if the optional punch unit is installed on the finisher.

  7. SR5000 series output tray for banner sheet

    Allows you to output paper that has a horizontal length of 487.8 mm (19.21 inches) or longer on Finisher SR5050/SR5110 or Booklet Finisher SR5060/SR5120.

  8. High capacity stacker

    Consists of the following paper trays:

    • Stacker upper tray

    • Stacker tray

    The stacker upper tray can hold up to 250 sheets of paper, and stacker tray can hold up to 5,000 sheets of paper. You can connect up to two high capacity stackers.

  9. Ring binder

    Binds sheets of paper with a ring comb.

  10. Multi-folding unit

    Applies the following folds: Half Fold, Letter Fold-out, Letter Fold-in, Double Parallel Fold, Gate Fold, and Z-fold.

  11. Interposer CI5040

    Inserts cover or slip sheets into printed paper. By attaching the double-feed detection kit for the interposer, the machine is configured to detect double feeds from the interposer.

    You can attach Finisher SR5110 or Booklet Finisher SR5120 together with this.

    Depending on when the machine was bought, this option may not be available. For details, contact your service representative.

  12. Perfect binder

    Applies adhesive to the spine of gathered pages to bind them in a booklet.

  13. Buffer pass unit

    Cools printed paper.

  14. Decurl unit

    Flattens curls from sheets to prevent paper jams.

  15. Three-tray wide LCT

    Holds up to 4,400 sheets of paper. You can load paper whose sizes are up to SRA3 or 13 × 191/5.

  16. Multi bypass tray (Tray A)

    Holds up to 500 sheets of paper.

  17. Banner sheet tray of multi bypass tray (Tray A)

    Allows you to load large-sized paper in the multi bypass tray (Tray A).

  18. Multi bypass attachment kit

    Attaches the multi bypass tray (Tray A) to the two-tray wide LCT.

  19. Interposer CI5030

    Inserts cover or slip sheets into printed paper.

    You can attach Finisher SR5050 or Booklet Finisher SR5060 together with this.

  20. A3/11 × 17 tray unit

    You can load A3, 11 × 17 or larger size paper in Tray 1 using this unit. If you install the A3/11 × 17 tray unit on your machine, you cannot use it as a tandem tray.

    An indicator on the front left side of the tray lights while paper is feeding.

  21. Interface box

    Allows you to connect extended options to the machine.

  22. Two-tray wide LCT

    Holds up to 4,800 sheets of paper. You can load paper whose sizes are up to SRA3 or 13 × 191/5. You can connect up to three two-tray wide LCTs.

  23. Bridge unit of two-tray wide LCT

    Connects a two-tray wide LCT to an additional two-tray wide LCT.

  24. Banner sheet tray of two-tray wide LCT

    Allows you to load large-sized paper in the two-tray wide LCT.

Note

  • You cannot install multiple finishers simultaneously.

  • You cannot install the three-tray wide LCT and the two-tray wide LCT simultaneously.

  • If you have connected two high capacity stackers, you cannot install the multi-folding unit, the ring binder, or the perfect binder.

  • You can install the multi-folding unit only if either Finisher SR5050/SR5110 or Booklet Finisher SR5060/SR5120 is installed.

  • You can install the ring binder or the perfect binder only if one of the following options is installed: Finisher SR5050/SR5110, Booklet Finisher SR5060/SR5120, or the high capacity stacker.

  • You can install the high capacity stacker only if the decurl unit is installed.

  • You cannot install the ring binder and perfect binder simultaneously.

  • Booklet Finisher SR5120, Finisher SR5110, Interposer CI5040, and Trimmer unit TR5050 cannot be used with the TotalFlow print server.

  • The multi bypass tray (Tray A) can be attached only if either the three-tray wide LCT or the two-tray wide LCT is installed. However, you can attach the multi bypass tray (Tray A) to the two-tray wide LCT only if the multi bypass attachment kit is installed.

  • Paper is ejected with the print side facing up when printing on banner paper in the printer function with the banner sheet tray of multi bypass tray (Tray A) or banner sheet tray of two-tray wide LCT attached. The setting specified by clearing the [Eject Face-up] check box or the output orientation specified in the color controller is ignored.

  • When using multiple linked two-tray wide LCTs, the multi bypass tray (Tray A) can be attached only to the two-tray wide LCT closest to the machine.

  • The banner sheet tray of two-tray wide LCT can be attached to the following trays:

    • When using a single two-tray wide LCT: Tray 3

    • When using 2 linked two-tray wide LCTs: Tray 5

    • When using 3 linked two-tray wide LCTs: Tray 7

Related topics

Precautions for using the finisher
Removing prints from Finisher SR5050 or Booklet Finisher SR5060 during printing
Removing prints from Finisher SR5110 or Booklet Finisher SR5120 during printing or when in standby state
When using the Z-fold function
When using the Letter Fold-out function
When ejecting thin paper to Finisher SR5110 or Booklet Finisher SR5120
When ejecting carbonless paper weighing 63 g/m2 or less to Finisher SR5110 or Booklet Finisher SR5120
When ejecting banner sheets to Finisher SR5110 or Booklet Finisher SR5120
When ejecting a large number of booklets to finisher booklet tray
When using the staple function on thin coated paper weighing 80 g/m2 or less
When ejecting thick paper or envelopes to the upper tray of the high capacity stacker
Precautions when taking booklets from the trimmer
PreviousNext