Skip header
 

Auto Reduce / Enlarge

The machine automatically detects the original size and then selects an appropriate reproduction ratio based on the paper size you select.

Illustration of Auto Reduce / Enlarge

Important

  • You cannot use the bypass tray with this function.

This is useful to copy different size originals to the same size paper.

To ensure the print result you require is produced, specify the original orientation before using Auto Reduce / Enlarge. Make sure that the original orientation setting matches the actual orientation of your original. For details, see Original Orientation.

The original sizes and orientations you can use with this function are as follows:

Region A icon(mainly Europe)

A0Portrait, A1PortraitLandscape, A2PortraitLandscape, A3PortraitLandscape, A4PortraitLandscape, B1 JISPortrait, B2 JISPortraitLandscape, B3 JISPortraitLandscape, B4 JISPortraitLandscape

Region B icon(mainly North America)

  • Engineering

    E (34 × 44)Portrait, D (22 × 34)PortraitLandscape, C (17 × 22)PortraitLandscape, B (11 × 17)PortraitLandscape, A (81/2 × 11)PortraitLandscape, 81/2 × 14Portrait

  • Architecture

    E (36 × 48)Portrait, D (24 × 36)PortraitLandscape, C (18 × 24)PortraitLandscape, B (12 × 18)PortraitLandscape, A (9 × 12)Portrait

  • Others

    81/2 × 13Portrait, 30 × 21Landscape, 30 × 42Portrait

1Press [Auto Reduce / Enlarge].

Operation panel screen illustration

2Select the paper size.

3Place the original, and start scanning.

Note

PreviousNext