Skip header
Help
 

Connecting the Machine via a Wireless LAN Interface

This section explains how to connect the machine to the network via a wireless LAN.

Important

  • Ad hoc mode is not supported.

  • Ethernet and wireless LAN cannot be used at the same time.

  • To switch from an Ethernet-based LAN to a wireless LAN, first plug the cable for the wireless LAN into the Ethernet board. Otherwise, wireless LAN cannot be used.

  • You can select either "WEP" or "WPA" as the Security Method. Ask your network administrator for the security method of Wireless LAN to use.

  • The factory default setting for [LAN Type] is [Ethernet].

  • You can configure the security method via Web Image Monitor.