Skip header
Help
 

Setting the encryption key

1Press the [User Tools] key.

2Press [Login].

3Enter the login password, and then press the [OK] key.

4Press the [Up arrow key] or [Down arrow key] key to display [System Settings], and then press the [OK] key.

5Press the [Up arrow key] or [Down arrow key] key to display [Interface Settings], and then press the [OK] key.

6Press the [Up arrow key] or [Down arrow key] key to display [IEEE 802.11], and then press the [OK] key.

7Press the [Up arrow key] or [Down arrow key] key to display [Det. Settings], and then press the [OK] key.

8Press the [Up arrow key] or [Down arrow key] key to display [Pre-shared Key Format], and then press the [OK] key.

9Press the [Up arrow key] or [Down arrow key] key to select [Passphrase] or [Hex], and then press the [OK] key.

10Press the [Up arrow key] or [Down arrow key] key to display [Pre-shared Key], and then press the [OK] key.

11Enter the pre-shared key, and then press the [OK] key.

  • You can enter up to 8 to 63 characters for [Passphrase].

  • You can enter up to hexadecimal characters up to 64 for [Hex].

12Press the [Up arrow key] or [Down arrow key] key to display [Key Length], and then press the [OK] key.

13Press the [Up arrow key] or [Down arrow key] key to select [64bit] or [128bit], and then press the [OK] key.

14Press the [Up arrow key] or [Down arrow key] key to display [Key Format], and then press the [OK] key.

15Press the [Up arrow key] or [Down arrow key] key to select [ASCII (5 digits)], [Hex (10 digits)], [ASCII (13 digits)] or [Hex (26 digits)], and then press the [OK] key.

  • If you selected [64bit] under [Key Length], you can enter 5 characters for [ASCII (5 digits)] or 10 characters for [Hex (10 digits)].

  • If you selected [128bit] under [Key Length], you can enter 13 characters for [ASCII (13 digits)] or 26 characters for [Hex (26 digits)].

16Press the [Up arrow key] or [Down arrow key] key to display [Encryption Key], and then press the [OK] key.

17Enter the encryption key, and then press the [OK] key.

  • If you selected [WPA-EAP] under [Encryption], or [WPA2(AES)] under [WPA], specify the [EAP Type].

  • If you use the authentication server, specify [EAP Type], [EAP User ID], [RADIUS User Name] and [RADIUS User Password] to enhance the security.