Printing Problems When Using Combine Mode

Problem	Cause	Solution
Prints are blank or parts of the image are not printed.	The size or orientation of the original is incorrect.	You cannot combine originals of different sizes and orientations.
The image is not printed correctly.	The originals were placed in the wrong order.	When using the ADF, place the originals face up. The first original should be placed on the top.
The image is not printed correctly.	The originals were placed in the wrong order.	When using the exposure glass, place the originals face down on the exposure glass. The first original should be placed first.

Problem

Cause

Solution

Prints are blank or parts of the image are not printed.

The size or orientation of the original is incorrect.

You cannot combine originals of different sizes and orientations.

The image is not printed correctly.

The originals were placed in the wrong order.

When using the ADF, place the originals face up. The first original should be placed on the top.

The image is not printed correctly.

The originals were placed in the wrong order.

When using the exposure glass, place the originals face down on the exposure glass.

The first original should be placed first.