Ethernet Configuration
Configure the following network settings according to the network interface you are using.
You can use SmartDeviceMonitor for Admin or a Web browser to configure IP address-related settings in a TCP/IP-capable environment.
Configure the printer for the network using the control panel.
The following table shows the control panel settings and their default values. These items appear in the [Host Interface] menu.
Setting Name |
Value |
|---|---|
IPv4 Settings |
|
IPv6 Settings |
Stateless Sett.: Active |
IPsec |
Not Active |
Frame Type (NW) |
Auto Select |
Active Protocol |
|
Ethernet Speed |
Auto Select |
IEEE802.1X Auth |
Not Active |
LAN Type |
Ethernet |
If DHCP is in use on your network, the IP address, subnet mask, and gateway address are all set automatically.
The menu items displayed on the control panel may differ depending on the optional unit installed.
Make this setting only when it is necessary. See Software Guide.
