Ethernet Configuration

Configure the following network settings according to the network interface you are using.You can use SmartDeviceMonitor for Admin or a Web browser to configure IP address-related settings in a TCP/IP-capable environment.

Configure the printer for the network using the control panel.
The following table shows the control panel settings and their default values. These items appear in the [Host Interface] menu.

Setting Name	Default
Machine IPv4 Address	DHCP: On IPv4 Address: 11.22.33.44 Subnet Mask: 0.0.0.0 Gateway Address: 0.0.0.0
IPv6 Stateless Setting	Active
IP Sec	Inactive
NW Frame Type	Auto Select
Effective Protocol	IPv4: Active IPv6: Inactive NetWare: Active SMB: Active AppleTalk: Active
Ethernet Speed	Auto Select
IEEE802.1X Auth.(Ethernet)	Inactive
Restr.IEEE802.1X Auth.Def	[Yes] or [No].
LAN Type	Ethernet

If DHCP is in use on your network, the IP address, subnet mask, and gateway address are all set automatically.
Configure these setting as necessary. See Software Guide for details.