User GuideIM 550/600 series

Reception Settings (Standard)

This section describes the settings in [Reception Settings] under [Fax Settings].

How to Use the "Settings"

Reception File Settings

Setting Items

Description

Action on Receiving File

Specify the output method of the received document.

  • Store: Store documents on the hard disk drive of the machine

    When [On] is selected, specify whether to notify that the document is stored and that memory is nearly full in [Store Notification Settings].

    • Default: [Off]

  • Forwarding: Forward the document to a pre-registered destination

    When [On] is selected, specify the forwarding destination, security, etc. in [Forwarding].

    • Default: [Off]

  • Print: Print the document automatically

    • Default: [On]

  • Memory Lock Reception: Perform Memory Lock Reception that requires entering the Memory Lock ID to print

    • Default: [Off]

Changing the Fax Reception Behavior Based on the Time or Day of the Week

Output Mode Switch Timer

Specify the output method of documents received during the specified time period from Print, ID Required Print, Forwarding, or Store.

  • Default: [Do not Use]

Changing the Fax Reception Behavior Based on the Time or Day of the Week

Prohibit Auto Print

Store the document as a standby to print document without printing it automatically.

  • Default: [Do not Prohibit]

Changing the Fax Reception Behavior Based on the Time or Day of the Week

Print Standby to Print Files

Select this to print a standby to print document designated by [Output Mode Switch Timer] and [Prohibit Auto Print].

Changing the Fax Reception Behavior Based on the Time or Day of the Week

Reception File Storing Error Setting

Specify whether to delete the oldest received document or cancel receiving new documents when the hard disk of the machine is full. When you select [Delete Old File and Receive New File], also specify whether to print the old document or print a report without printing the document.

  • Default: [Delete Old File and Receive New File], [Print Old File]

Storing the Received Fax Documents in the Machine

Reception File Storage Location

Specify whether to store received documents in the fax memory or hard disk of the machine.

  • Default: [Fax Memory]

Reception Mode Settings

Setting Items

Description

Switch Reception Mode

Select whether to receive an incoming fax automatically or manually depending on the fax usage.

  • Default: [Auto Reception]

Register Special Sender

Setting Items

Description

Register/Change/Delete

Register senders to specify the reception setting. You can specify a different setting for each sender.

Register Special Sender: Print List

Select this to print the list of special senders.

Authorized Reception

Select this to limit the sender of the incoming fax to receive.

  • Default: [Off]

Special Reception Function

Specify whether to use the Special Sender function.

  • Default: [Off]

Print/Store on Forwarding Special Sender

Specify whether to print or store the document received from a Special Sender and forwarded to the specified destination.

  • Default: [Off]

Receive Fax (Caller ID Blocked)

Specify whether to receive faxes without caller ID.

  • Default: [Accept]

Bypass Tray Paper Size

Specify the paper size when the bypass tray is specified to output the documents received from a special sender.

Specifying the Action to Perform When Receiving a Fax from Different Senders

Preventing Unwanted Faxes

Stored Reception File User Setting

Setting Items

Description

Stored Reception File User Setting

Specify the user to manage the received documents stored on the hard disk drive (administrative user). When an administrative user is specified, you are asked to enter the user code or login information of the administrative user when viewing, printing, and deleting documents from Web Image Monitor. You can also restrict viewing, printing, and deleting of the stored reception files on the control panel.

  • Default: [Off]

Reception File Print Settings

Setting Items

Description

2 Sided Print

Combine Two Originals

Checkered Mark

Center Mark

Configure the following functions:

  • Print the received document on both sides of paper or two pages on a sheet

  • Print a checkered mark or center mark on the output sheets of the received document

  • Default

    • 2 Sided Print: [Off]

    • Combine Two Originals: [Off]

    • Checkered Mark: [On]

    • Center Mark: [On]

Printing a Mark or Information on the Received Fax

Specifying the Printing Method of the Received Fax Document

Print Reception Time

Select whether to print the reception date and time in the bottom margin of the output sheet.

  • Default: [Off]

Reception File Print Quantity

Specify the number of copies of the received document to print.

  • Default: [1] set(s)

Paper Tray

Specify the paper source for printing the received documents. A paper tray is not specified when [Auto Select] is selected.

  • Default: [Auto Select]

Just Size Printing

Specify whether to print received documents only when paper of the same size as the document is available in any of the tray.

  • Default: [Off]

Specify Tray for Lines

Select whether to specify a tray to eject the printed sheets of the received document per line type and sender (telephone line, Internet Fax, or IP-Fax).

  • Default: [Off]

Folder Transfer Settings

Setting Items

Description

Folder Transfer Result Report

Select whether to notify the specified destination of the result of transferring a document by e-mail when the destination of forwarding or Forwarding per Sender includes a folder. You can apply the security setting (encryption and signature) to the e-mail.

  • Default: [Do not Email]

Email address/Folder Path on Communication Log

Specify whether to display the e-mail address or folder path instead of the destination's name in the destination field of the transmission history when sending or forwarding a document to a destination registered in the address book.

  • Default: [Do not Display]

File Name Setting in Folder Transfer

Specify the settings related to the file name of the document transferred to folders, such as adding destination information and limiting characters that can be used. When limited, you can only use alphanumeric characters, "-", and "_" in the file name; however, the last two are not allowed to be used at the beginning of the file name.

  • Default

    • Add Sender Information to File Name: [No]

    • Limit File Name Character Type: [No]

Remote Reception Setting per Line

Setting Items

Description

Remote Reception Setting per Line

Select whether to print documents received on the main machine from a sub-machine when using the Remote Fax function. You can specify the sub-machine per reception line.

Maximum Reception Size

Setting Items

Description

Maximum Reception Size

Specify the maximum reception size. When a document of a size other than the specified one is sent, the machine receives it in the specified size by reducing it automatically.

  • Default: [A4]

Trays for Paper Tray Selection

Setting Items

Description

Trays for Paper Tray Selection

Specify the tray to be used with the Fax function.

  • Default: [On]

Light Response after Receiving Fax

Setting Items

Description

Light Response after Receiving Fax

Specify whether to turn on the rotating warning light after completing a fax reception.

  • Default: [Do not Turn On the Light]