User Stamp
Copies a scanned image as a stamp.
Letters or images you use frequently can be registered as a user stamp. For details about how to register a user stamp, see Registering a user stamp (Settings screen type: Standard) or Registering a user stamp (Settings screen type: Classic).
You cannot use the bypass tray with this function.
Only one message can be stamped each time.
Press [Edit / Color].
Press [Stamp] twice.
Press [User Stamp].
Select the stamp you require.
Press [Change].
Select the stamp position, and then press [OK].
Press [All Pages] or [1st Page Only] to select the print page.
Press [Stamp Color].
Select the stamp color, and then press [OK].
Press [OK] three times.
For details about stamp positions, see Stamps.
You can change the settings for User Stamp under [User Stamp] in Settings. For details, see User Guide of your device.
User Stamp is used to register an image that is used as a user stamp. Place the original of the image that you want to register as a user stamp on the exposure glass.
The size range for stamp images is 10–216 mm (0.4–8.5 inches) high and 10–297 mm (0.4–11.7 inches) wide. When using a wide format printer, the size range for stamp images is 10–432 mm (0.4–17.0 inches) high and 10–297 mm (0.4–11.7 inches) wide. However, if the stamp's size exceeds the maximum value of the area (5000 mm2, 7.75 inch2), it will be automatically corrected to a size that is within the range of the area.
: Horizontal size
: Vertical size
Up to four frequently used images can be stored in memory. When using a wide format printer, up to 40 can be stored in memory.
Press [Home] (
) at the bottom of the screen in the center.Flick the screen to the left, and then press the [Settings] icon.
Press [Copier / Document Server Settings].
Press [Edit / Stamp]
[Stamp] [User Stamp] [Program / Delete User Stamp].
Select the program number to which you want to register a stamp, and then press [Program / Change].
Press [Stamp Name / Image], and then specify the stamp name and size.
Place the original of the stamp on the exposure glass, and then press [Start Scanning].
Press [Exit].
Press [Home] (
) at the bottom of the screen in the center.
If the stamp number is already being used, the machine will ask you if you want to overwrite it. Press [Yes] or [Stop].
You cannot restore the overwritten stamp.
Stamp numbers with a stamp name already have settings in them. Stamp numbers that are not registered yet are marked with "Not Programmed".
For details about how to enter text, see How to Enter Text.
User Stamp is used to register an image that is used as a user stamp. Place the original of the image that you want to register as a user stamp on the exposure glass.
The size range for stamp images is 10–216 mm (0.4–8.5 inches) high and 10–297 mm (0.4–11.7 inches) wide. When using the Wide Format Printers, the size range for stamp images is 10–297 mm (0.4–11.7 inches) wide and 10–432 mm (0.4–17.0 inches) high. However, if the stamp's size exceeds the maximum value of the area (5000 mm2, 7.75 inch2), it will be automatically corrected to a size that is within the range of the area.
: Horizontal size
: Vertical size
Up to four frequently used images can be stored in memory. When using the Wide Format Printers, up to 40 can be stored in memory.
Press [Home] (
) at the bottom of the screen in the center.Flick the screen to the left, and then press the [Settings] icon.
Press [Machine Features Settings].
Press [Copier / Document Server Settings].
Press [Stamp].
Press [User Stamp].
Press [Program / Delete Stamp].
Press the stamp number you want to program.
Enter the user stamp name (up to 10 characters) with the letter keys, and then press [OK].
Enter the horizontal size of the stamp with the number keys, and then press [
].
Press
(Vertical).Enter the vertical size of the stamp with the number keys, and then press [
].Place the original for user stamp on the exposure glass, and then press [Start Scanning].
Press [Settings] (
) on the top right of the screen.Press [Home] (
) at the bottom of the screen in the center.
If the stamp number is already being used, the machine will ask you if you want to overwrite it. Press [Yes] or [Stop].
You cannot restore the overwritten stamp.
Stamp numbers with
already have settings in them. Stamp numbers that are not registered yet are marked with "Not Programmed".For details about how to enter text, see How to Enter Text.
Deletes an image registered as a user stamp.
You cannot restore a deleted stamp.
Press [Home] (
) at the bottom of the screen in the center.Flick the screen to the left, and then press the [Settings] icon.
Press [Copier / Document Server Settings].
Press [Edit / Stamp]
[Stamp] [User Stamp] [Program / Delete User Stamp].Select the program number of the stamp that you want to delete, and then press [Delete] twice.
Press [Delete].
Press [Exit].
Press [Home] (
) at the bottom of the screen in the center.
Deletes an image registered as a user stamp.
You cannot restore a deleted stamp.
Press [Home] (
) at the bottom of the screen in the center.Flick the screen to the left, and then press the [Settings] icon.
Press [Machine Features Settings].
Press [Copier / Document Server Settings].
Press [Stamp].
Press [User Stamp].
Press [Program / Delete Stamp].
Press [Delete], and then press the stamp number you want to delete.
Select [Yes].
Press [Settings] (
) on the top right of the screen.Press [Home] (
) at the bottom of the screen in the center.