Top Page > Preparation > Getting Started > Guide to Functions of the Machine's Options > Guide to Functions of the Machine's External Options

Guide to Functions of the Machine's External Options

Previous Next

Illustration of external options numbered callout illustration

Booklet Finisher SR5120
Sorts, stacks, and staples multiple sheets of paper. The saddle stitch function can staple multiple sheets of paper in the center and fold them into booklets. Consists of the following paper trays:
- Finisher shift tray 1
- Finisher shift tray 2
- Finisher booklet tray
Prints can be punched if the optional punch unit is installed on the finisher.
Depending on when the machine was bought, this option may not be available. For details, contact your service representative.
Trimmer unit TR5050
Cuts the fore edge of the book block after the book block is saddle stitched.
Booklet Finisher SR5120 is required in order to attach this.
Depending on when the machine was bought, this option may not be available. For details, contact your service representative.
Finisher SR5110
Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:
- Finisher shift tray 1
- Finisher shift tray 2
Prints can be punched if the optional punch unit is installed on the finisher.
Depending on when the machine was bought, this option may not be available. For details, contact your service representative.
Booklet Finisher SR5060
Sorts, stacks, and staples multiple sheets of paper. The saddle stitch function can staple multiple sheets of paper in the center and fold them into booklets. Consists of the following paper trays:
- Finisher upper tray
- Finisher shift tray
- Finisher booklet tray
Prints can be punched if the optional punch unit is installed on the finisher.
Trimmer unit TR5040
Cuts the fore edge of the book block after the book block is saddle stitched.
Booklet Finisher SR5060 is required in order to attach this.
Finisher SR5050
Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:
- Finisher upper tray
- Finisher shift tray
Prints can be punched if the optional punch unit is installed on the finisher.
SR5000 series output tray for banner sheet
Allows you to output paper that has a horizontal length of 487.8 mm (19.21 inches) or longer on Finisher SR5050/SR5110 or Booklet Finisher SR5060/SR5120.
High capacity stacker
Consists of the following paper trays:
- Stacker upper tray
- Stacker tray
The stacker upper tray can hold up to 250 sheets of paper, and stacker tray can hold up to 5,000 sheets of paper. You can connect up to two high capacity stackers.
Ring binder
Binds sheets of paper with a ring comb.
Multi-folding unit
Applies the following folds: Half Fold, Letter Fold-out, Letter Fold-in, Double Parallel Fold, Gate Fold, and Z-fold.
Interposer CI5040
Inserts cover or slip sheets into printed paper. By attaching the double-feed detection kit for the interposer, the machine is configured to detect double feeds from the interposer.
You can attach Finisher SR5110 or Booklet Finisher SR5120 together with this.
Depending on when the machine was bought, this option may not be available. For details, contact your service representative.
Perfect binder
Applies adhesive to the spine of gathered pages to bind them in a booklet.
Multi bypass tray (Tray A)
Holds up to 500 sheets of paper.
Banner sheet tray of multi bypass tray (Tray A)
Allows you to load large-sized paper in the multi bypass tray (Tray A).
Multi bypass attachment kit
Attaches the multi bypass tray (Tray A) to the wide LCT.
Interposer CI5030
Inserts cover or slip sheets into printed paper.
You can attach Finisher SR5050 or Booklet Finisher SR5060 together with this.
Interface box
Allows you to connect extended options to the machine.
Wide LCT
Holds up to 4,800 sheets of paper. You can load paper whose sizes are up to SRA3 or 13 × 19¹/₅. You can connect up to three wide LCTs.
Bridge unit of wide LCT
Connects a wide LCT to an additional wide LCT.
Banner sheet tray of wide LCT
Allows you to load large-sized paper in the wide LCT.

You cannot install multiple finishers simultaneously.
If you have connected two high capacity stackers, you cannot install the multi-folding unit, the ring binder, or the perfect binder.
You cannot attach the banner sheet tray of wide LCT and the banner sheet tray of multi bypass tray (Tray A) simultaneously.
You can install the multi-folding unit only if either Finisher SR5050/SR5110 or Booklet Finisher SR5060/SR5120 is installed.
You can install the ring binder or the perfect binder only if one of the following options is installed: Finisher SR5050/SR5110, Booklet Finisher SR5060/SR5120, or the high capacity stacker.
You cannot install the ring binder and perfect binder simultaneously.
Booklet Finisher SR5120, Finisher SR5110, Interposer CI5040, and Trimmer unit TR5050 cannot be used with the TotalFlow print server.
The multi bypass tray (Tray A) can be attached only if the wide LCT is installed. However, you can attach the multi bypass tray (Tray A) to the wide LCT only if the multi bypass attachment kit is installed.
When the Ring Binder or Perfect Binder is attached, printing on banner paper (700.1–1260 mm, 27.56–49.61 inches) is not possible. You can specify such paper as a custom size paper on the control panel, but the machine aborts preparation when printing is performed. If this occurs, cancel the job.
Paper is ejected with the print side facing up when printing on banner paper with the banner sheet tray of multi bypass tray (Tray A) or banner sheet tray of wide LCT attached. The output orientation specified on the color controller or in the printer driver is ignored.
When using multiple linked wide LCTs, the multi bypass tray (Tray A) can be attached only to the wide LCT closest to the machine.
The banner sheet tray of wide LCT can be attached to the following trays:
- When using a single wide LCT: Tray 3
- When using 2 linked wide LCTs: Tray 5
- When using 3 linked wide LCTs: Tray 7