Skip header
 

When ejecting thin paper to Finisher SR5110 or Booklet Finisher SR5120

When ejecting plain paper of length 420.1 mm or more and weighing 64 g/m2 or less to Finisher SR5110 or Booklet Finisher SR5120, attach the supplied thin paper support tray.

1Press the [Suspend / Resume] key on Finisher SR5110 or Booklet Finisher SR5120, and then remove the delivered paper.

See Removing prints from Finisher SR5110 or Booklet Finisher SR5120 during printing or when in standby state.

2Pull out the extension tray on the finisher shift tray 1 or 2.

Extension tray illustration

3Attach the thin paper support tray by fitting its protrusions in the slots on the finisher.

Thin paper support tray illustration

4Press the [Suspend / Resume] key to resume printing.

PreviousNext