The following is an overview of the menus that are available on the [Detailed Settings] tab of the PCL 6 printer driver. For details about other items that can be configured from each menu, see the printer driver Help.
The available functions may vary depending on the optional units that are installed. For details about the optional units required for this function, see "Functions Requiring Optional Configurations", Device Management.
Job Setup menu
You can specify job type, the classification code, and authentication.
For details about how to store data on the hard disk of this machine and print it using the control panel, see Storing Documents in the Hard Disk Drive and Printing Them.
For details about registering classification codes, see Registering Classification Codes.
Basic menu
You can specify the original orientation, size, print size, and print color.
Paper menu
You can configure settings for the source tray, paper type, tab stock printing, and Letterhead Setting.
For details about tab stock printing, see Tab Stock Printing.
Cover/Slip/Designate menu
You can configure the settings for cover sheet, slip sheet, and chapter page.
For details about front and back cover sheet, see Cover Sheet.
For details about slip sheet, see Slip Sheets.
For details about chapter page, see Chapter Page.
2 Sided/Layout/Booklet menu
You can configure combine printing, two-sided printing, and booklet printing settings.
For details about specifying combine printing, see Combining Multiple Pages into Single Page.
For details about specifying two-sided printing, see Printing on Both Sides of Sheets.
For details about booklet printing, see "Booklet Printing", Preparation.
Imposition menu
You can configure poster function settings.
For details about poster function, see Poster.
Output Settings menu
You can configure the settings for the output tray, collate, and banner page.
For details about collate, see Collate.
For details about banner page, see Banner Page.
When printing on banner paper, paper is ejected with the print side facing up regardless of the setting specified in [Eject Face-up].
Finishing menu
You can configure staple, punch, fold, ring binding, perfect binding, and fore edge cut settings.
Print Quality:Standard menu
You can configure settings such as resolution and toner saving.
For details about toner saving, see Conserving Toner When Printing.
Print Quality:Advanced menu
You can configure settings such as barrier-free color management, color balance, and vector/raster.
For details about barrier-free color management, see Standard Printing.
Effects menu
You can configure unauthorized copy prevention and watermark settings.
For details about enabling watermark, see Watermarks.
For details about specifying unauthorized copy prevention, see Printing Documents That Are Not Authorized for Duplication.
Driver Options menu
Use this menu to provide functions concerned with controls peculiar to printer driver. For details, see the printer driver Help.
For details about the PCL 5c printer driver, see the printer driver Help.