Previous
Using this function, you can insert Front cover sheet/back cover sheet fed from a different tray to that of the main paper, and print on them.
If the PCL 6 printer driver is used, Cover Sheet can be specified in the [Cover/Slip/Designate] menu on the [Detailed Settings] tab. If the PCL 5c printer driver is used, it can be specified in the [Paper] tab. For printing methods, see the printer driver Help.
If you load cover sheet on an optional interposer, cover sheet is not printed.
Front Cover sheet
Prints the first page of the document on the sheet for the cover page.
Print on one side
Prints on the cover sheet
Leaves cover sheet blank
Print on both sides
Prints on both sides of cover sheet
Prints on only one side of cover sheet
Leaves cover sheet blank
Back Cover sheet
Prints the last page of the document as the back cover pages.
Print on one side
Prints on the back cover sheet face inside
Prints on the back cover sheet face outside
Leaves back cover sheet blank
Print on both sides
Prints on the back cover sheet face inside
Prints on the back cover sheet face outside
Leaves back cover sheet blank
The number of pages is odd
The number of pages is even
The front cover sheet/back cover sheet should be the same size and orientation as the body paper.
When loading the front cover sheet/back cover sheet in the tray, set the relevant paper size.
The front cover sheet/back cover sheet cannot be used with slip sheet.
To print on both sides of the cover sheet, select two-sided printing in the printer driver. For details about specifying two-sided printing, see Printing on Both Sides of Sheets.
Job reset occurs when front cover sheet, back cover sheet, and Perfect Binding are specified at the same time.
