Problem |
Solutions |
---|---|
The printed image is different from the image on the computer's display. |
When you use some functions, such as enlargement or reduction, the layout of the image might be different from that displayed on the computer display. |
Images are cut off, or excess pages are printed. |
If you are using paper smaller than the paper size selected in the application, use the same size paper with that selected in the application. If you cannot load paper of the correct size, use the reduction function to reduce the image, and then print. For details, see the printer driver's Help. |
As a result of printing using PDF Direct Printing, characters are missing or misshapen. |
Fonts were not embedded. Before printing, embed the font in the PDF file to be printed. |
The paper size appears on the control panel and printing is not performed with PDF Direct Print. |
When PDF Direct Print is used, printout requires paper set within the PDF file. When a message indicating a paper size appears, either place the indicated size in the paper tray or perform Form Feed. Also, if [Sub Paper Size] in the [System] menu is set to [Auto], printing is performed assuming Letter size and A4 size to be the same size. For example, when a PDF file set to A4 size paper is printed using PDF Direct Print and Letter size paper is loaded in the paper tray, or vice versa, the file will be printed out. |
The color of the printout is different from the color on the computer's display. |
|
The color of the printout is different from the color specified. |
If a specific color is missing turn the printer off, wait a few moments, and then turn it on again. If this does not resolve the problem, contact your sales or service representative. |
The color changes significantly when adjusted with the printer driver. |
Do not make extreme settings for the color balance on the [Print Quality:Advanced] menu under the [Detailed Settings] tab in the printer driver's dialog box. Note that the sample image displayed in the printer driver is used only to show what processing will be performed, so it may not match the print results. For details, see the printer driver's Help. |
Color documents are printed in black and white. |
|
Solid areas, lines, or text are shiny or glossy when created as a mixture of cyan, magenta, yellow. |
|
Black gradation is not natural. |
|
A color is missing or partially blurred. |
|