Use the following procedure to set up the printer:
Select a suitable location for your printer.
For details, see Install Location.
Take the printer out of its box.
Check the items that come with the printer.
For details, see Checking the Contents of the Box.
Remove the protective materials and adhesive tape.
For details, see Unpacking.
Attaching the optional paper feed unit to the printer as necessary.
For details, see Attaching the Paper Feed Unit.
Load paper in the paper feed tray.
For details, see Loading Paper.
Plug in the power cord, and then turn on the printer.
For details, see Connecting the Power Cord, and Turning On/Off the Power.
Configure the Installation Settings.
For details, see Setup Guide.
For details about how to connect the printer to your network, see Connecting the Printer.
For details about how to configure the printer's network settings, see Configuring the Network Settings.
Print a test page.
For details, see Setup Guide.
Install the printer driver.
For details, see Setup Guide.