Previous
This section describes supported network connections and settings for IP addresses and wireless LAN security.
After configuring network settings, you can print the configuration page to confirm the settings. For details, see Test Printing.
Contact your network administrator for information about configuring network settings.
Ethernet and wireless LAN cannot be used at the same time.
For details about setting items and their default values, see Host Interface.
You can configure the basic network settings by using a wizard while configuring Installation Settings that is performed when the printer is turned on for the first time or by using [Network Config. Wizard] under Host Interface. For details about Installation Settings, see Setup Guide.
You can also use Web Image Monitor to configure the IP address-related settings. For details, see Web Image Monitor Help.
