Skip header
 

Cut Paper

This function cuts a paper roll at the specified length from the paper's leading edge.

Important

  • Perform no other operations while a paper roll is being cut.

  • An error will occur and cutting paper will not be possible if:

    • One of the machine's covers is open.

    • The machine is performing maintenance operations.

    • The machine has run out of paper.

1Press [Home] () at the bottom of the screen in the center.

2Flick the screen to the left, and then press the [User Tools] icon ().

3Press [Machine Features].

4Press [Maintenance].

5Press [Cut Paper].

6Select the paper input location and length to cut paper, and then press [Start].

Operation panel screen illustration

The cutting length is set to [Short] when you select [Paper Input Location in Use].

7Press [Exit].

8Press [User Tools] () on the top right of the screen.

9Press [Home] () at the bottom of the screen in the center.

Note