Skip header
 

When a Time Limit Is Not Specified for Additional Originals

Specify one of the following settings to determine how long the machine waits to scan additional originals when a time limit is not specified. To access these settings, press [Scanner Features] > [Scan Settings] > [Next Original Wait Setting].

Operation panel screen illustrationWhen Using the Scanner Application

Operation panel screen illustration

About how to use the application's screen, see "[Scanner] Screen".

Operation panel screen illustrationWhen Using the Scanner (Classic) Application

1Specify the scan settings and orientation for your original.

For details about scan settings, see Specifying Scan Settings.

For details about original orientation, see Setting of Original Feed Type.

2Press [Next Original Wait].

3Make the necessary settings for sending by e-mail or Scan to Folder and storing.

For details, see Basic Procedure for Sending Scan Files by E-mail, Basic Procedure When Using Scan to Folder, or Basic Procedure for Storing Scan Files.

4Place the originals.

Originals are scanned in order. Place them from the first page.

The selected destination is displayed while the machine is waiting for additional originals.

5To scan additional originals, place them.

Repeat this step until all originals are scanned.

6After all originals are scanned, press [Sharp].

Storing or sending starts.