Skip header
 

Placing rolled originals

When placing rolled originals, you can use the output basket.

1Check that the output basket is in basic mode.

Output basket illustration

2Adjust the original guides to the original size.

3Place the trailing edge of the rolled original on the output basket.

4Pull the leading edge of the original up to the original table with the side to be scanned facing down.

5Using both hands, carefully insert the original between the original guides.

Original table illustration

Note

  • When loading long originals, use both hands to support the original as it feeds until half of it is scanned so feeding is not interrupted.

  • Do not apply excessive force to the output basket.

  • For details about how to use the output basket, see Setting the Output Basket.