Skip header
 

Scanning an original using a carrier sheet

Use the carrier sheet when scanning originals such as originals drawn in pencil, and pasted originals.

For details, see Originals that should be scanned using the carrier sheet.

Important

  • When using the carrier sheet, originals should be ejected onto the original output guides. If the original is ejected onto the original stackers, it might be damaged. For details about how to eject originals onto the original output guides, see Ejecting originals onto the original output guides.

1Open the carrier sheet with the transparent sheet face up, and then insert the original also face up.

Align the original with the fold of the carrier sheet.

Carrier sheet illustration

2Adjust the original guides to the size of the carrier sheet.

3Using both hands, hold the carrier sheet face down, and carefully insert the folded edge of the carrier sheet between the original guides.

Original table illustration

Note

  • When using the carrier sheet with Synchro Cut, the paper is cut to the size of the carrier sheet.