Previous
To start using the Unified Communication System services with this machine, you must set up this machine to use the services according to the conditions in which the machine was purchased and the environment in which the machine is used. This involves specifying the name of the machine and your password, configuring the network settings, and registering contact.
Step |
Reference |
|
|---|---|---|
1 |
Checking the Package contents. |
|
2 |
Installing the machine. |
|
3 |
Connecting the power cord set. |
|
4 |
Connecting a video output cable. |
|
5 |
Connecting cables. (If using a audio input/output device) |
|
6 |
Connecting an Ethernet cable. (If using a wired network) |
|
7 |
Turning on the power. |
|
8 |
Selecting the language and time zone. |
|
9 |
Specifying Wired/Wireless Network Configuration. |
|
10 |
Checking the Contact ID from the Contact List screen. |
|
Step |
Reference |
|
|---|---|---|
1 |
Starting your Web browser. |
|
2 |
Changing the default password and machine name. |
|
3 |
Registering a contact to Address Book. |
|
